My location :
Home  > for sale  > tools
Ads in category: 747
Allison DOC V8.4 - $300 (Bakersfield )
Allison DOC  V8 4 -  300  Bakersfield
Allison DOC v8.4I can install Allison DOC on your computer, this software is what's used for retrieving DTC(diagnostic trouble codes) changing CMC's (programming) and for troubleshooting purposes. Als
  300 USD
Portable Press - $350 (Tehachapi)
Portable Press -  350  Tehachapi
Hubtamer elite. This is a must for replacing front wheel drive bearings and hubs, but can be used for many other applications. I have owned it for two years but the tool is in like new condition and h
  350 USD
Automotive Leak finder - $800 (Tehachapi)
Automotive Leak finder -  800  Tehachapi
Blue point smoker. This tool is handy for checking vacuum leaks, intake leaks. It is like new condition I bought it a couple of years ago but only used it a couple of times. I paid 1200.00 for it new
  800 USD
Work Bench / Table - $200 (NW Bakersfield )
Work Bench   Table -  200  NW Bakersfield
Solid wood workbench 6 foot long, by 31 inch deep by 31 inch high with a shelf and pegboard back 4x4 legs ...height, length, and width can be adjusted to your needs .. $200.....I also build other type
  200 USD
1 inch rope - dock line -anchor rode- climbing rope - $125 (lake isabella)
1  inch rope - dock line -anchor rode- climbing rope -  125  lake isabella
I have some 1 inch rope - dock line -anchor rode- climbing rope . there is some oil stains or something dark color on some of the rope .looks to be in good usable condition.see pics for condition..1
  125 USD
ESP Smog Machine. New "bench" 8/13/13 passes all calibration test. Ready to work. Includes EVAP tester, ZERO air cylinder, approved fan. (zero air generator is included but not working) Call Sa
  16000 USD
Exhaust tubing Bender (Bend Pak - $3500 (Wasco,CA)
Exhaust tubing Bender  Bend Pak -  3500  Wasco CA
BB-1 tubing bender up to 3" All parts are included. Machine is in perfect working order. Also have 3.5" and 4" swedger included. call Sam, 661-34three-seven416 Also have FLOWMASTER AND MAGNAFLOW
  3500 USD
small bong for bud n wax w everthing (southwest)
small bong for bud n wax w everthing  southwest
Clean bong. i got the attatchments for waxi got a glass nail, the dome , nd the down stem& a bowl for weed. Its all for a low price of 40$ill also throw in a torch.text preffered 661-748-7702420 frie
  Contact Us
TOOL BOX & Tools - $45 (Gosford & Ming)
TOOL BOX  amp  Tools -  45  Gosford  amp  Ming
4 Draw tool box / chest with tools. 1/4 drive...3/8 drive....1/2 drive sockets..ratchets...misc.Sockets are sold as incomplete (missing some). Tools in the upper section need rust removal & cleaningan
  45 USD
transmission jack or lift - $50
transmission jack or lift -  50
For sale is a used 450lb transmission jack bought from harbor freight tools.Only used once on a geo prizm tranny swap.Don't need it anymore, buy it for $50 and save money. This sells for $82 plus tax
  Contact Us
high volume low pressure spray gun - $80
high volume low pressure spray gun -  80
Selling a brand new Harbor Freight tools HVLP spray gun kit.Uses turbine compressor. This is BRAND NEW never been used.Bought it to paint my motorcycle but got too lazy and decided to use rattle can i
  Contact Us
CTT drill press 13" 12 speed bench top - $150 (Bakersfield )
CTT drill press 13  12 speed bench top -  150  Bakersfield
Have a CTT Tools drill press. It is a 13 inch 12 speed goes from 250 to 3100. It has a 5/8 chuck and a 3/4 motor. Overall height is 39 inches. It is a bench top drill press. Also has light. Selling
  150 USD
Computer Scanner - $28 (tehachapi)
Computer Scanner -  28  tehachapi
Snap-on Solus Pro scann tool. I baught it new a couple of years ago then added air bags, ABS brakes, and the European programs which by itself cost me over 1500.00, it has the 2012 updates already loa
  28 USD
A.C. Machine - $20 (Tehachapi)
A C  Machine -  20  Tehachapi
Robinair fully automated AC machine R134a. this machine does it all recover, recycle, vacuum, and charge. the only defect is the vacuum gauge is stuck but the machine still works fine. I'm asking 280
  20 USD
DeWalt Power tools and case - $150 (SW Bakersfield)
DeWalt Power tools and case -  150  SW Bakersfield
DeWalt power tool set. Circular saw, reciprocating saw, hammer drill, handle, flashlight, black case. Needs new battery.Randy661-412-0573 I WILL ONLY RESPOND TO TEXT, NO PHONE CALLS!661-706-9357 Loc
  150 USD
welding clamps 10.00 to 50.00 - $10 (bakersfield)
welding clamps   10 00  to 50 00 -  10  bakersfield
i have a 18" welding clamp very large over heavyHigh-strength electro-galvanized sliding pin T-handle -- rounded ends for comfort, size engineered to load capacity, New U-Shaped tempered steel sliding
  10 USD
greenlee 438-10 steel fish tape 25.00 - $25 (bakersfield)
greenlee 438-10 steel fish tape       25 00 -  25  bakersfield
High-impact nylon, one-piece handle for maximum durability, long life, and easy, comfortable use. * Large handle grip for greater user control. * Self-tensioning case for easy tape winding. (No tensio
  25 USD
power tools / non power tools 5.00 to 75.00 - $5 (bakersfield)
power tools   non power tools       5 00 to 75 00 -  5  bakersfield
DEWALT multi set, 5 in oneHitachi, craftsman, kolbolt and many others, have a little bit od everything, several differtent sets they wont last long, first come first serve. drills, minor saws, sanders
  5 USD
tools / hand / old /
tools   hand   old
we have the old the new and the ugly. we have stuff from the 1920s to 2013 and somthing from in between, all kinds of odd stuff, the one thing you just got to have , have several boxes of men junk
  Contact Us
nokita heat gun kit 25.00 - $25 (bakersfield)
nokita heat gun kit       25 00 -  25  bakersfield
Nikota CY-150 Heat Gun Kit, in Box w/Accessories, Maximum......1500 Watts, Two Heat Settings:, Level 1.......700 F, 350 C, Level II.......900 F, 450 C, Heat Resistant Cover & ABS Housing, Kit Include
  25 USD

Copyright 2009 Classified ::